Skip to main content

Mbed Connect USA 2018

Learn from the world's leading IoT developers

  Oct. 16, 2018   11:30:00

Mbed Connect has been Arm TechCon's IoT developer day since 2016. This is a developer-focused event, created and instructed by developers for developers. Join us to hone your skills with the assistance of our experts with a full day track of keynotes and hands-on workshops.

Who Should Attend?

Attending the developer event puts you a step ahead of your peers providing you the ability to deliver key insights about Mbed as well as an array of other IoT devices, highlighting key industry trends and learnings. This program allows you to immerse with leading IoT innovators and participate in experiences ranging from keynotes by technical founders to smaller, hands-on forums.

Register for Mbed Connect at Arm TechCon

Free Arm TechCon Expo Pass included with registration of Mbed Connect!

Agenda: IoT Expert Speakers & Hands-on Workshops

The day will consist of a full day track of IoT developer talks with the added option of joining one of the developer tabletop workshops occurring in the afternoon. The tabletop workshop will be small group hands-on workshops that will run for approximately 1 hour at a time. See below for more detail on the available workshops. Note: Space is limited at the tabletop workshops.

Keynote Speakers

Time Title Speaker
11:45 – 11:50 Welcome Jan Jongboom
Principal Developer Evangelist, Arm
11:50 – 12:15 Keynote - Hitchhiker’s guide to the industrial IoT Abhinav Khushraj
Co-founder & CEO, Petasense
12:15 – 12:40 Keynote - Going industrial with LPWANs Johan Stokking
Co-founder, The Things Network
12:40 – 13:30 Lunch
13:30 – 14:00 Mbed State of the Union Bartek Szatkowski
Tech Lead Mbed OS, Arm
14:00 – 14:30 Test automation using hardware simulation Dan Shemesh
14:30 – 15:00 Machine learning on microcontrollers Neil Tan
Tech Lead uTensor, Arm
15:00 – 15:30 Data Science for IoT developers Damon Civin
Principal Data Scientist, Arm
15:30 – 15:45 Coffee break
15:45 – 16:15 Real attacks on IoT systems Andrew Frame
Director Business Development, Arm
16:15 – 16:45 The role of standards in IoT security Hannes Tschofenig
Senior Principal Engineer, Arm
16:45 – 17:15 Low powered nodes Martin Kojtal
Staff Software Engineer, Arm
17:15 – 19:00 Closing statements

Drinks reception begins

Afternoon Hands-on Workshops

Hands-on Workshop Leader Description
Indoor positioning Frederic Servais,
Determining the position of a device through GPS is great but it is not always an option. Modules can be expensive, power hungry, and only works outdoors. This workshop introduces alternative positioning methods and gives a practical introduction to indoor positioning through Wi-Fi.
Bluetooth Low Energy Austin Blackstone,
It's estimated that in 2018 around 1 billion Bluetooth Low Energy (BLE) devices will ship. That's an unbelievable number! Interested in being part of this massive market and want to learn how to develop BLE devices, join us at this workshop. This workshop will cover the basics of BLE and how to use Mbed OS to develop BLE applications.

Install BLE Scanning app on phone (LightBlue Explorer for iOS, nRF Connect for Android). Install ST Link if using windows. Install Mbed CLI (use installer links).
Introduction to Data Science Takuya Kitazawa,
Treasure Data
Gathering vasts amount of data is only part of what the Internet of Things is. How do you do something useful with all that data? This workshop introduces you to data acquisition, visualization, and running machine learning models on big data sets.
Using LoRaWAN with The Things Network Johan Stokking,
The Things Network
LoRaWAN is a networking technology that combines kilometers of range with very low power consumption, which is a perfect fit for IoT devices. And because it's operating in the unlicensed spectrum everyone can set up a network. This workshop introduces you to the worldwide community driven by The Things Network, and shows how to build and connect LoRaWAN devices.
Introduction to the Mbed simulator Jan Jongboom,
The feedback loop when developing IoT devices is slow. It requires compilation, flashing, and getting the device back into the state that you were testing. In addition, it always requires hardware, which is not always practical. Wouldn't it be great if you could test the software on a computer first? This workshop introduces you to the experimental online Mbed simulator and shows how to dramatically shorten your feedback loop.
Getting started with ARMv8-M on the Nuvoton M2351 Robert Ling,
Traditionally, microcontrollers have a flat address space and no process isolation; that has changed. The new ARMv8-M architecture brings Arm TrustZone to Arm Cortex-M MCUs, allowing multiple security domains to run on the same processor. This workshop introduces you to the new security features in ARMv8-M, and gives you hands-on experience with the Nuvoton M2351, the first development board to implement these new features.
Faster to production with Sigma Delta Technologies Inc. Jiwon Yune,
Sigma Delta
Making a hardware product can be tricky. Connecting it to your web or mobile application is even trickier. This workshop introduces you to an efficient way to develop and connect your hardware products to a cloud or your smartphone, using Sigma Delta Technologies' hardware modules.
Develop managed IoT applications with Arm Pelion and NXP Clark Jarvis & Alejandra Guzmán,
How do you quickly build a secure and scalable IoT deployment? With pre-defined and well-tested blocks of hardware and software. This workshop introduces the Arm Pelion platform, which offers secure provisioning and firmware updates, in combination with NXP's platforms and tools. You'll learn how to efficiently develop and debug IoT applications with NXP microcontrollers and Arm Pelion.
Sensor to cloud with ST Microelectronics and the Arm Pelion IoT platform Jim Carver,
Learn how to use tools from Arm to connect the ST Microelectronics IoT Discovery kit to Pelion cloud, including the rich set of on board sensors. Attendees will receive a complimentary IoT discovery kit as well as a free developer account for Arm Pelion IoT platform.

Register for Mbed Connect at Arm TechCon

Join us at Mbed Connect in China and Japan:

  • Mbed Connect China – Shanghai, China, October 22
  • Mbed Connect Japan – Tokyo, Japan, December 5

*More information coming soon

150 W San Carlos St, San Jose, CA 95113
San Jose

Important Information for this Arm website

This site uses cookies to store information on your computer. By continuing to use our site, you consent to our cookies. If you are not happy with the use of these cookies, please review our Cookie Policy to learn how they can be disabled. By disabling cookies, some features of the site will not work.